1
0
IaC/ansible/roles/archinstall/tasks/main.yml
2023-08-15 03:20:21 +10:00

124 lines
3.7 KiB
YAML

---
- name: attach installation iso as virtual media
- name: boot from installation iso
- name: detect booted ip address
- name: configure disks
# Specify root disk and part, set to type 23 (linux root x86-64), label root
# Specify efi disk and part, set to type 1 (efi system), label efi
# format efi partition
# mkfs.fat -F32 /dev/mmcblk0p1
# Ecrypt root partition
# cryptsetup -y -v luksFormat /dev/sda1 # TODO add keyfile/password automatically
# cryptsetup open /dev/sda1 root
# mkfs.ext4 /dev/mapper/root
# mkdir /mnt/root
# mount /dev/mapper/root /mnt/root
# mkdir /mnt/root/efi
# mount /dev/mmcblk0p1 /mnt/root/efi
# Add cryptsetup params to kernel cmdline
# cryptdevice=UUID=device-UUID:root root=/dev/mapper/root rw
# add efi to /etc/fstab
- name: sync ntp
# timedatectl set-timezone Australia/Brisbane
# timedatectl set-ntp true
# run reflector to get a list of mirrors
# relfector -c AU --save /etc/pacman.d/mirrorlist
# update dbs
# pacman -Sy
# pacstrap
# pacstrap -K /mnt/root base linux-lts linux-firmware nano openssh bind bash efibootmgr reflector screen pv pinentry sudo man-db man-pages texinfo ufw nftables intel-ucode e2fsprogs dosfstools curl cryptsetup
# sbctl sbsigntools fwupd fwupd-efi dmidecode udisks2 usbutils inetutils ethtool
# gen fstab
# genfstab -L /mnt/root >> /mnt/root/etc/fstab
#
# chroot from here
#
# set hostname
# echo hv00 > /etc/hostname
# TODO add entries to /etc/hosts
# 127.0.0.1 localhost
# ::1 localhost
# 127.0.1.1 static_fqdn
# link timezone
# ln -sf /usr/share/zoneinfo/Australia/Brisbane /etc/localtime
# enable ntp again
# timedatectl set-ntp true # TODO move this post reboot
# sync hardware clock
# hwclock --systohc
# set locale
# sed -i 's/#en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/g' /etc/locale.gen
# locale-gen
# echo LANG=en_US.UTF-8 > /etc/locale.conf
# uncomment wheel group in /etc/sudoers
# sed -i 's/# %wheel ALL=(ALL:ALL) ALL/%wheel ALL=(ALL:ALL) ALL/g' /etc/sudoers
# add user
# useradd -u 1000 -U -m -b /home/ -G wheel -s /bin/bash ladmin
# set new user password
# disable root password
# passwd -l root
# create /etc/kernel/cmdline file
# echo 'cryptdevice=dbbb9fb2-5509-4701-a2bb-5660934a5378:root root=/dev/mapper/root rw' > /etc/kernel/cmdline
# echo 'rd.luks.name=dbbb9fb2-5509-4701-a2bb-5660934a5378=root root=/dev/mapper/root rw' > /etc/kernel/cmdline
# create a default systemd-networkd config
# enable systemd-networkd
# enable sshd
# enable ufw service
# enable ufw firewall
# create ufw config to allow ssh port 22
# modify mkinitcpio for encryption
# old HOOKS=(base udev autodetect modconf kms keyboard keymap consolefont block filesystems fsck)
# new HOOKS=(base systemd keyboard autodetect modconf kms block sd-encrypt filesystems fsck)
# sed -i 's/^HOOKS=(base udev autodetect modconf block filesystems keyboard fsck)/HOOKS=(base udev autodetect modconf block encrypt filesystems keyboard fsck)/g' /etc/mkinitcpio.conf
# geneate sb keys with sbctl
# keys go to /usr/share/secureboot/keys/db/db.pem
# enroll sbctl keys
# add console= option to cmdline file
# create initcpio post hook /etc/initcpio/post/uki-sbsign
# make /etc/initcpio/post/uki-sbsign executable
# chmod +x /etc/initcpio/post/uki-sbsign
# make initcpio
# mkinitcpio -p linux-lts
# vfio and iommu
# add 'intel_iommu=on iommu=pt' to kernel cmdline
# add vfio binding
# vp2420 iGPU = 8086:4555
# add vfio-pci ids to /etc/kernel/cmdline
# vfio-pci.ids=8086:4555
# add vfio modules to mkinitcpio.conf
# MODULES=(vfio_pci vfio vfio_iommu_type1)
# ensure modconf hook is in mkinitcpio.conf
# HOOKS=(base systemd keyboard autodetect modconf kms block sd-encrypt filesystems fsck)